Steps to rescan for antenna channels on your Sony TV

August 10, 2022

If you have a new TV or are rescanning to obtain NewsChannel 5, please follow the steps below. Do you own a different brand of television? Go to our antenna store and choose the type of TV you own.

A rescan is referred to differently by each TV maker. The rescan function on most Sony televisions is referred as as “Auto Program.”

FIRST, TRY THESE. If you’ve already accessed your TV’s settings, following instructions should assist you with rescanning your TV.

1. Press the “Home” button on your remote
2. Choose “Settings”
3. Select “Channel Setup” then “Auto Program

SONY ADAPTIVE TVS (These are internet-connected smart TVs) These guidelines were obtained directly from the Sony support website.

. Press the HOME button on the remote control.
2. Select Settings.
3. This step will vary depending on the options available in your TV menu. Follow the steps accordingly.

  • Select Channels → Channel setup
  • Select Watching TV → Channels → Channel setup

4. Select Auto Program.

If you have other tv brands consider below steps

1. Using your remote or the buttons on the TV itself, locate the Menu or Home button.
2. Use the up, down or left and right buttons to move through the on-screen menu and locate the Set up or Settings menu. NOTE: All TVs are different in terms of the auto program procedures. The following is a general guide, but the steps or the terminology may be different for your model.
3. Select System or Channels.
4. Select Program channels, Auto program, or Digital scan
5. Press Select, Enter or OK to start the scan.

Comments 0

Leave a Reply