The sound of people conversing awakens you in the living room. The television is on, but no one is watching it when you break into the house with your heaviest skillet. It’s not a ghost, so don’t freak out. However, it isn’t actually a ghost: You may have another piece of equipment interfering with the sleep cycle of your television if it turns on and off irregularly. Here’s how to Stop TV From Randomly Turning On or Off itself.
▶️Table Of Contents
- 1 To disconnect the television from the wall outlet, disconnect the cable (and Plug It Into the Wall)
- 2 It’s a good idea to turn off your Wi-Fi when you’re through with it.
- 3 The timer on your television should be checked to see whether it hasn’t gone off.
- 4 Rechargeable batteries for the remote control
- 5 Look around your neighborhood for televisions.
- 6 The Eco Mode on your television has to be altered.
- 7 Stop TV From Randomly Turning On or Off itself by updating software
- 8 Reset the device to the default factory settings.
To disconnect the television from the wall outlet, disconnect the cable (and Plug It Into the Wall)
As with any other electronic device, turning it off and on again is a good first step before doing anything else. For 10 seconds, hold down the power button on your TV while unplugged. Then plug it back in. Repeat the procedure if the issue persists.
A faulty surge protector can be avoided by promptly plugging in your surge protector to the wall socket. If the problem remains, try a different outlet, preferably one that is not connected to a switch. In this case, a surge protector may be a good idea.
If I had to guess, I’d say your power issues are caused by HDMI-CEC, should you ask me. Using an HDMI cable and a feature called Consumer Electronics Control, or CEC for short, you may link your gadgets to one another. You don’t even need a separate remote for a PlayStation. The problem is that if something goes wrong, your television will keep turning itself off and on.
Check to see if disabling CEC in your TV’s settings fixes the problem. Depending on the manufacturer, CEC may go by several names (Sony calls it Bravia Sync, Samsung calls it Anynet+, and LG calls it SimpLink), so you’ll have to look up the name of the setting on your TV. It’s conceivable, but unlikely, that disabling CEC on all of your other devices may fix the issue.
It’s a good idea to turn off your Wi-Fi when you’re through with it.
The “smart” features of many televisions may make them appear a little unsophisticated in comparison, ironically. Your TV may be inadvertently turned on or off by a routine or other automation if your TV is connected to other smart home devices such as SmartThings, Amazon Echo, Google Home, or Logitech Harmony. In some cases, your phone may automatically turn on your television when you try to watch a YouTube video since your television may have a built-in “casting” function.
Read Also: How to solve blank screen with no video display
In order to prevent the smart services from transmitting any unwanted signals to your home network, turn off Wi-Fi on your TV and leave it off for a few days before using any of these apps. Check your other smart apps and devices to see if they are interfering with your TV on a regular basis, depending on whether or not turning off Wi-Fi fixes the problem.
The timer on your television should be checked to see whether it hasn’t gone off.
It’s common for current televisions to contain a feature that allows you to schedule the television to turn on or off at specified times of the day. It’s possible that a youngster or a cat sat on the remote control and mistakenly set it to turn on and off at the same time every day. Look for the option to turn off power scheduling in your TV’s settings and turn it off.
If the batteries on your remote control have run out, you’ll need to get new ones.
Rechargeable batteries for the remote control
If your remote’s battery is running low, it may send out incorrect signals due to fluctuations in its power. Changing the batteries in your remote control may assist if that doesn’t work. You should also clean the buttons while you’re at it. If you spilt cola all over the screen, the power button may be as simple as holding it down and turning off the TV.
Look around your neighborhood for televisions.
The great majority of televisions aren’t supposed to talk to each other, but if they’re close enough, televisions from the same manufacturer might readily intercept remote orders. If you have a Vizio in the living room and another Vizio across the hall, for example, the remote signals from one area may affect the remote signals from the other area.
Your next-door neighbor may be utilizing a universal remote that transmits compatible codes to your television, even though this is highly unlikely. There is a chance that this might happen. However, it has been reported that the infrared sensors of some TVs can be deceived by direct sunlight streaming through the window, resulting in the TV turning on.
The Eco Mode on your television has to be altered.
The power button on the back of many new televisions may not entirely shut down. To save power while still taking benefit of some of the features stated above while in low-power sleep mode, they enter a sleep mode (like turning on when someone casts a YouTube video from their phone).
If you can’t figure out what’s wrong with your television, turn on the “Eco Mode” setting. There are a number of other ways this feature might be referred to, but once you’ve finished watching, it will effectively shut down your television. You may lose some built-in functionality, but at least you’ll have some piece of mind while you investigate the issue. If your soundbar or other linked devices are transmitting signals to your television while they are sleeping, be sure to check the Eco Mode settings on those devices.
Stop TV From Randomly Turning On or Off itself by updating software
Similarly, as with any technology, these issues may be caused by software errors that may be fixed by applying a simple software update. Because TV firmware updates can occasionally cause their own problems and are therefore included in the list, I only advocate it if it is absolutely required.
Make sure to examine your television’s settings if you haven’t been able to identify the source of the problem. If you have to use a flash drive to install the software on your television, check the manufacturer’s support page to see if any updates have been made available for your model.
Reset the device to the default factory settings.
In the end, if all else fails, you may have to go nuclear and reset your TV to its factory defaults. That whatever was wrong will hopefully be restored to its original state. Remember to make each modification one at a time and wait at least a few days between each one before trying to restore your preferences. A recurring issue will allow you to zero in on the exact configuration setting that caused the issue.
If a factory reset doesn’t fix the problem, get in touch with the device’s maker’s customer service. In some cases, it is conceivable that your television has a known fault or hardware issue that can be remedied by a specialist.